Kubernetes on bare-metal in 10 minutes

Kubernetes is an open-source container orchestration framework which was built upon the learnings of Google. It enables you to run applications using containers in a production ready-cluster. Kubernetes has many moving parts and there are countless ways to configure its pieces - from the various system components, network transport drivers, CLI utilities not to mention applications and workloads.

Note: this blog post was originally written in 2017 for Kubernetes 1.6 and has been updated in 2020 for Kubernetes >=1.16 and a more secure networking configuration

Introduction

In this blog post we'll install Kubernetes 1.16 on a bare-metal machine with Ubuntu 18.04 in about 10 minutes. At the end you'll be able to start learning how to interact with Kubernetes via its CLI kubectl.

Kubernetes overview:

Above: Kubernetes Components by Julia Evans

Pre-reqs

I suggest using Equinix Metal (aka Packet) for running through this tutorial which will offer you raw and unadulterated access to bare-metal hosts. You can also run through this on a VM or your own PC if you're running Ubuntu 18.04 as your OS.

Head over to your Equinix Metal dashboard and create a new project.

I want to see the power and speed of what bare metal can offer so I'm going for the c1.small.x86 which offers 4x Xeon cores @ 3.5 GHz and 32GB RAM per host. There's also a 120GB SSD which we can use for the OS and for any container images we'll need.

create-three-nodes

The cheapest host is the t1.small.x86 which comes in at around $0.07/hour and offers 4x Atom cores and 8GB RAM. You can view the pricing plans here.

Installation

The hosts will take a few minutes to bootstrap, after which you should log into each via ssh and begin installing the same set of packages for Docker and Kubernetes. containerd is now available as an alternative runtime, but is slightly more work to configure.

  • Install Docker

A known / tested version of Docker must be used with the kubeadm bootstrapper, otherwise we'll potentially encounter unknown behaviours. The apt package repository contains a sufficiently old version for us.

$ sudo apt-get update \
  && sudo apt-get install -qy docker.io
  • Add the Kubernetes package source

This command from the Kubernetes documentation adds the package repository where kubeadm, kubectl and the related packages are published on a regular basis.

$ sudo apt-get update \
  && sudo apt-get install -y apt-transport-https \
  && curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | sudo apt-key add -
OK
  • Perform a packages update:
$ echo "deb http://apt.kubernetes.io/ kubernetes-xenial main" \
  | sudo tee -a /etc/apt/sources.list.d/kubernetes.list \
  && sudo apt-get update 

Now update your packages list with apt-get update.

  • Install kubelet, kubeadm and kubernetes-cni

The kubelet is responsible for scheduling, managing and running containers on your hosts. kubeadm tool is a production-ready convenience utility used to configure the various components that make up a working cluster. The kubernetes-cni package represents the networking components which are not built into Kubernetes directly.

CNI stands for Container Networking Interface which is a spec that defines how network drivers should interact with Kubernetes. CNI network driver processes run using UNIX pipes and are forked for each request.

$ sudo apt-get update \
  && sudo apt-get install -yq \
  kubelet \
  kubeadm \
  kubernetes-cni

We need to put the Kubernetes packages on hold because if we do not, when a newer version is released and we run apt-get upgrade, we could end-up with an unexpected bump in our Kubernetes version.

sudo apt-mark hold kubelet kubeadm kubectl
  • Swap must be disabled

The Kubernetes maintainers decided that the use of swap memory can lead to unpredictable behaviours and preferred to turn it off, than to contend with any of the side-effects that may come up.

You can check if you have swap enabled by typing in cat /proc/swaps. If you have a swap file or partition enabled then turn it off with swapoff. You can make this permanent by commenting out the swap file in /etc/fstab.

$ cat /proc/swaps
Filename                                Type            Size    Used    Priority
/dev/md127                              partition       1995772 0       -2
$ sudo swapoff /dev/md127

$ sudo vim /etc/fstab

UUID=2358eec8-dda6-4212-9cf6-92f515a1b631       /       ext4    errors=remount-ro       0       1
#UUID=b038c1b7-fa7f-4f20-b554-6c2885d73ba5      none    swap    none    0       0

At this point you should have run the above steps on each of your nodes. These are all common steps.

  • Initialize your cluster with kubeadm

You only need to run this step on your designated master node, for me that was k8s-bare-metal-1.

From the docs:

kubeadm aims to create a secure cluster out of the box via mechanisms such as RBAC.

Whilst container orchestrators like Docker Swarm were monolithic and distributed as a single binary, Kubernetes takes a modular and extensible approach. Networking is added only after creating the initial cluster and it's up to the user to pick from one of the dozen networking drivers available.

We will be using Weave net today from Weaveworks. Weave net is easy to install and performs very strongly in benchmarking against similar drivers and can offer features like password-protection and link encryption.

  • Decide on which IP address you want to use for Kubernetes

    Kubernetes expose its API server over the private, or the public networking. If you use the public networking then you can administrate the cluster from your own laptop or your CI/CD server, but there may be higher charges for any data that passes over the public Internet.

    If you want to use the cluster only within your internal private network, then use the private IP. For the sake of this tutorial, we'll use the internal network.

  • Find the privte network's IP address

Equinix Metal provides two networks for its machines - the first is a datacenter link which goes between your hosts in a specific region and project and the second faces the public Internet. There is no default firewall - if you want to lock things down you'll have to configure iptables or ufw rules manually.

You can find your private/datacenter IP address through ifconfig:

root@kubeadm:~# ifconfig bond0:0
bond0:0   Link encap:Ethernet  HWaddr 0c:c4:7a:e5:48:d4  
          inet addr:10.80.75.9  Bcast:255.255.255.255  Mask:255.255.255.254
          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1

We'll now use the internal IP address to broadcast the Kubernetes API - rather than the Internet-facing address.

You must replace --apiserver-advertise-address with the IP of your master node host.

$ sudo kubeadm init --apiserver-advertise-address=10.80.0.133 --kubernetes-version stable-1.16
  • --apiserver-advertise-address determines which IP address Kubernetes should advertise its API server.

  • --skip-preflight-checks allows kubeadm to check the host kernel for required features. If you run into issues where a host has the kernel meta-data removed you may need to run with this flag.

  • --kubernetes-version stable-1.16 this pins the version of the cluster to 1.16, but if you want to use Kubernetes 1.15 for example - then just alter the version. Removing this flag will use whatever counts as "latest".

You'll get output like this if everything went to plan, if not, then check the steps above.

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 10.80.0.133:6443 --token xyzz.abcb494cnfj \
    --discovery-token-ca-cert-hash sha256:bf0108833a2cf083b5069e9dff1d502337c0538508975b039cba7d477c278c72 
  • Configure an unprivileged user-account

Equinix Metal's Ubuntu installation ships without an unprivileged user-account, so let's add one.

$ sudo useradd k8s -G sudo -m -s /bin/bash
$ sudo passwd k8s
  • Configure environmental variables as the new user

You can now configure your environment with the instructions at the end of the init message above.

Switch into the new user account and configure the KUBECONFIG

sudo su k8s

cd $HOME
sudo cp /etc/kubernetes/admin.conf $HOME/
sudo chown $(id -u):$(id -g) $HOME/admin.conf

Now try out the KUBECONFIG file:

echo "export KUBECONFIG=$HOME/admin.conf" | tee -a ~/.bashrc
source ~/.bashrc

Try a kubectl command to see if the master node is now listed, note it will be in a NotReady status for the time being

$ kubectl get node
NAME               STATUS     ROLES    AGE     VERSION
k8s-bare-metal-1   NotReady   master   3m32s   v1.16.3
  • Apply your Pod networking (Weave net)

We will now apply configuration to the cluster using kubectl and our new KUBECONFIG file. This will enable networking and our master node will become Ready, at that point we'll move onto the other worker hosts.

sudo mkdir -p /var/lib/weave
head -c 16 /dev/urandom | shasum -a 256 | cut -d" " -f1 | sudo tee /var/lib/weave/weave-passwd

kubectl create secret -n kube-system generic weave-passwd --from-file=/var/lib/weave/weave-passwd

Since we are using the default Pod network for host networking, we need to use a different private subnet for Weave net to avoid conflicts. Fortunately the 192.168.0.0/24 space is available for use.

$ kubectl apply -f "https://cloud.weave.works/k8s/net?k8s-version=$(kubectl version | base64 | tr -d '\n')&password-secret=weave-passwd&env.IPALLOC_RANGE=192.168.0.0/24"

We've now configured networking for pods.

  • Optional step - taint the master

Kubernetes aims to be a highly available clustering container orchestrator where workloads are spread out over multiple hosts with redundancy. We can however force a single master node to run workloads for development by removing its "taint":

This is only recommended if you are running with a single host, do not run this step if you are adding other hosts into the cluster.

$ kubectl taint nodes --all node-role.kubernetes.io/master-

Join the other hosts

When we ran kubeadm init on the master node, it outputted a token which is valid for 24-hours. We now need to use that to join other hosts.

kubeadm join 10.80.0.133:6443 --token xyzz.abcb494cnfj  --discovery-token-ca-cert-hash sha256:bf0108833a2cf083b5069e9dff1d502337c0538508975b039cba7d477c278c72

If you receive an error at this point, it's likely because you forgot a step above. Rememebr that you need to turn off swap memory for every host, not just the master.

Perform the join step on every host.

Move back to the ssh session for the master node where you are logged in as the k8s unprivileged user.

You should see all your nodes in the Ready status now.

$ kubectl get node
NAME                STATUS   ROLES    AGE    VERSION
k8s-bare-metal-02   Ready    <none>   113s   v1.16.3
k8s-bare-metal-03   Ready    <none>   10s    v1.16.3
k8s-bare-metal-1    Ready    master   15m    v1.16.3

Test the cluster

  • Check it's working

Many of the Kubernetes components run as containers on your cluster in a hidden namespace called kube-system. You can see whether they are working like this:

NAME                                           READY   STATUS    RESTARTS   AGE
pod/coredns-5644d7b6d9-vwhvb                   1/1     Running   0          16m
pod/coredns-5644d7b6d9-xgn4b                   1/1     Running   0          16m
pod/etcd-k8s-bare-metal-1                      1/1     Running   0          15m
pod/kube-apiserver-k8s-bare-metal-1            1/1     Running   0          15m
pod/kube-controller-manager-k8s-bare-metal-1   1/1     Running   0          15m
pod/kube-proxy-29j7n                           1/1     Running   0          67s
pod/kube-proxy-j5bzn                           1/1     Running   0          2m50s
pod/kube-proxy-p444z                           1/1     Running   0          16m
pod/kube-scheduler-k8s-bare-metal-1            1/1     Running   0          15m
pod/weave-net-bgkwp                            2/2     Running   0          67s
pod/weave-net-gmr88                            2/2     Running   0          2m50s
pod/weave-net-td9hm                            2/2     Running   0          7m40s

NAME               TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)                  AGE
service/kube-dns   ClusterIP   10.96.0.10   <none>        53/UDP,53/TCP,9153/TCP   16m

NAME                        DESIRED   CURRENT   READY   UP-TO-DATE   AVAILABLE   NODE SELECTOR                 AGE
daemonset.apps/kube-proxy   3         3         3       3            3           beta.kubernetes.io/os=linux   16m
daemonset.apps/weave-net    3         3         3       3            3           <none>                        7m40s

NAME                      READY   UP-TO-DATE   AVAILABLE   AGE
deployment.apps/coredns   2/2     2            2           16m

NAME                                 DESIRED   CURRENT   READY   AGE
replicaset.apps/coredns-5644d7b6d9   2         2         2       16m

As you can see all of the services are in a state of Running which indicates a healthy cluster. If these components are still being downloaded from the Internet they may appear as not started.

You can also run kubectl get all --all-namespaces. A shortcut for --all-namespaces is -A.

$ kubectl get svc -A
NAMESPACE     NAME         TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)                  AGE
default       kubernetes   ClusterIP   10.96.0.1    <none>        443/TCP                  17m
kube-system   kube-dns     ClusterIP   10.96.0.10   <none>        53/UDP,53/TCP,9153/TCP   17m

Run a container

You can now run a container on your cluster. Kubernetes organises containers into Pods which share a common IP address, are always scheduled on the same node (host) and can share storage volumes.

First check you have no pods (containers) running with:

$ kubectl get pods

I wrote a sample application to show developers how to package a Node.js and Express.js microservice. It's called alexellis/expressjs-k8s and you can star or fork it on GitHub.

Let's install it using its helm chart which uses the new Helm 3 release. Helm is used to package Kubernetes manifest YAML files. These YAML files offer a way of packaging an application using a declarative approach.

If you're using MacOS or Linux simply run the below:

curl https://raw.githubusercontent.com/helm/helm/master/scripts/get-helm-3 | bash

If you're a Windows user, then install Git Bash and then run the above in a new terminal.

As of Helm 3, each project manages its own repository for charts published either to S3 or GitHub Pages. Let's add the repo for expressjs-k8s and then perform a sync.

# First add the helm repo
helm repo add expressjs-k8s https://alexellis.github.io/expressjs-k8s/

# Then run an update
helm repo update

# And finally install
helm install test-app expressjs-k8s/expressjs-k8s

You can now view the events from the Kubernetes API and see the container image for the microservice being pulled in from the Internet and scheduled on one of the nodes.

$ kubectl get events --sort-by=.metadata.creationTimestamp -w

11s         Normal    Scheduled                 pod/test-app-expressjs-k8s-75667c6649-6hjft    Successfully assigned default/test-app-expressjs-k8s-75667c6649-6hjft to k8s-bare-metal-02
11s         Normal    ScalingReplicaSet         deployment/test-app-expressjs-k8s              Scaled up replica set test-app-expressjs-k8s-75667c6649 to 1
11s         Normal    SuccessfulCreate          replicaset/test-app-expressjs-k8s-75667c6649   Created pod: test-app-expressjs-k8s-75667c6649-6hjft
10s         Normal    Pulling                   pod/test-app-expressjs-k8s-75667c6649-6hjft    Pulling image "alexellis2/service:0.3.5"
5s          Normal    Pulled                    pod/test-app-expressjs-k8s-75667c6649-6hjft    Successfully pulled image "alexellis2/service:0.3.5"
5s          Normal    Created                   pod/test-app-expressjs-k8s-75667c6649-6hjft    Created container expressjs-k8s
4s          Normal    Started                   pod/test-app-expressjs-k8s-75667c6649-6hjft    Started container expressjs-k8s

# Hit Control + C when done

The helm chart outputs some information on how to access the service:

Check the deployment status:

  kubectl rollout status -n default deploy/test-app-expressjs-k8s

Now port-forward the service to test it out:

  kubectl port-forward -n default svc/test-app-expressjs-k8s 8088:8080 &

Try to connect with a browser:

  http://127.0.0.1:8088

Run the port-forward command and then access the service via curl:

curl   http://127.0.0.1:8088
curl   http://127.0.0.1:8088/api/links

You can find out which node the Pod is running on like this:

$ kubectl get pod -o wide
NAME                                      READY   STATUS    RESTARTS   AGE   IP              NODE             
test-app-expressjs-k8s-75667c6649-6hjft   1/1     Running   0          83s   192.168.0.193   k8s-bare-metal-02

If you like, you can scale the amount of Pods available, at this point, running the previous command should spread the pods across the two worker nodes that I created.

$ kubectl get deploy
NAME                     READY   UP-TO-DATE   AVAILABLE   AGE
test-app-expressjs-k8s   1/1     1            1           2m30s

$ kubectl scale deploy/test-app-expressjs-k8s --replicas=2 
deployment.apps/test-app-expressjs-k8s scaled

Now we have high-availability for our microservice:

$ kubectl get pod -o wide
NAME                                      READY   STATUS    RESTARTS   AGE   IP              NODE             
NAME                                      READY   STATUS    RESTARTS   AGE     IP              NODE             
test-app-expressjs-k8s-75667c6649-6hjft   1/1     Running   0          3m16s   192.168.0.193   k8s-bare-metal-02
test-app-expressjs-k8s-75667c6649-v28wl   1/1     Running   0          26s     192.168.0.241   k8s-bare-metal-03
  • View the Dashboard UI

The Kubernetes dashboard offers a visual representation of the resources in the cluster and it can be accessed from your local computer too.

When we initialized the clsuter earlier we chose to advertise only on the local network, so we'll need to connect over ssh with port-forwarding to view the dashboard after deploying it.

kubectl apply -f https://raw.githubusercontent.com/kubernetes/dashboard/v2.0.0-beta4/aio/deploy/recommended.yaml

Check its status:

$ kubectl get deploy/kubernetes-dashboard -n kubernetes-dashboard
NAME                   READY   UP-TO-DATE   AVAILABLE   AGE
kubernetes-dashboard   1/1     1            1           25s

Reconnect to the master with a tunnel to our local computer:

export IP="master-node-ip"

$ ssh -L 8001:127.0.0.1:8001 root@$IP
$ # sudo su k8s

$ kubectl proxy &

Since the dashboard shows us resources across our whole cluster, we will need to create an admin account for it.

kubectl apply -f - <<EOF
apiVersion: v1
kind: ServiceAccount
metadata:
  name: admin-user
  namespace: kubernetes-dashboard
EOF

Then run:

kubectl apply -f - <<EOF
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: admin-user
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cluster-admin
subjects:
- kind: ServiceAccount
  name: admin-user
  namespace: kubernetes-dashboard
EOF

Now we need to find token we can use to log in. Execute following command:

kubectl -n kubernetes-dashboard describe secret $(kubectl -n kubernetes-dashboard get secret | grep admin-user | awk '{print $1}')

Now copy the token and paste it into Enter token field on login screen.

Now navigate to http://localhost:8001/api/v1/namespaces/kubernetes-dashboard/services/https:kubernetes-dashboard:/proxy/#!/login/ in a web-browser.

The dashboard can show objects in any namespace, but starts off by presenting the default namepsace where we deployed our microservice earlier using helm.

Here are the two replicas of the Node.js microservice running on our two worker nodes:

pods

And here we can see our three nodes in the cluster:

nodes

Find out more on GitHub: kubernetes/dashboard.

For alternatives to the Kubernetes dashboard see also:

  • Weave Cloud - an insightful SaaS monitoring product from Weaveworks which has long-term storage and can be accessed from anywhere.
  • Octant - from VMware and designed from the ground up, you can run this on your local computer

Wrapping up

You've now created a Kubernetes cluster and run your first microservice in Node.js using helm. From here you can start to learn all the components that make up a cluster and explore tutorials using the kubectl CLI.

  • Add more nodes

    Now that you've provisioned your single-node cluster with Equinix Metal - you can go ahead and add more nodes with the join token you got from kubeadm.

  • Learn by example

    I found Kubernetes by Example by Michael Hausenblas to be a detailed and accessible guide.

  • Read my highlights from KubeCon, San Diego - OpenFaaS Cloud, Flux, Linkerd, k3s goes GA and more!

    Our KubeCon San Diego Highlights

  • Deploy the Cloud Native PLONK Stack

    You may have heard of the LAMP stack for Linux, Apache, MySQL and PHP? The PLONK Stack is designed to power application deployments on Kubernetes by using several of the most popular cloud native projects together - Prometheus Linux/Linkerd OpenFaaS NATS and Kubernetes.

    Read the article: Introducing the PLONK Stack

Enjoyed the tutorial? 🤓💻

Follow me on Twitter @alexellisuk to keep up to date with new content. Feel free to reach out if you have any questions, comments, suggestions.

Hire me to help you with Cloud Native

Email me at alex@openfaas.com to see if I can help you with a project.

Acknowledgements:

Thanks to @mhausenblas, @kubernetesonarm, and Bryan Boreham for feedback on the post and for sharing their tips on setting up a Kubernetes cluster.

Alex Ellis

Read more posts by this author.

Subscribe to Alex Ellis' Blog

Subscribe to keep in touch. By providing your email, you agree to receive marketing emails from OpenFaaS Ltd

or subscribe via RSS with your favourite RSS reader

Learn Go with my new eBook

eBook cover

"Everyday Go" is the fast way to learn tools, techniques and patterns from real tools used in production based upon my experience of building and running OpenFaaS at scale.

Buy a copy on Gumroad