jinx is a wrapper script for nginx written entirely in Bash. It helps you manage your sites and configurations in a more streamlined way than working with plain shell commands.

• Prerequisites
• Installation
• Updating
• Deinstallation
• Configuring jinx
  • Setting options
  • Getting options
  • Available options
• Using the commands
  • jinx start|restart|stop
  • jinx logs
  • jinx site
    • jinx site activate
    • jinx site deactivate
    • jinx site delete
    • jinx site create
    • jinx site edit
• Templating
  • Naming of templates
  • Default template
  • Replacement variables
• Miscellaneous
• Contributors

Since this is an early release of jinx, it still has some assumptions about your enviroment. Currently these are as follows:

• Your sites are organized in two folders: sites-available and sites-enabled: The former one holding all available sites you could potentially host and the latter holding the sites that are reachable on the web.

Installation of jinx can be done in one line using the convenient installer script. Just copy and paste this into your terminal and you'll be all set!

bash <(curl -s https://raw.githubusercontent.com/pretzelhands/jinx/master/installer)

If you don't trust using curl with remote scripts, you can inspect the script and execute the steps manually.

jinx will occasionally (once a day) check if a new version is available in this repository. Should this be the case you will receive a little notice on top of the other commands.

If you're ever unsure which version of jinx you're running you can check with jinx version.

You need only run jinx update and the tool will handle the rest!

You should probably skip this chapter. 😁

Should you ever wish to uninstall jinx, you can do so with jinx uninstall. You will be asked if you're really sure that this is what you wanted. To complete deinstallation run jinx uninstall -y

jinx has a few configuration options that you should be aware of. When you run jinx for the first time it will automatically create a .jinx/config in your home directory and display a notice that this has happened. This configuration file contains some basic configuration to make everything run smoothly.

A first run looks approximately like this:

$ jinx start
First run! Creating default configuration in ~/.jinx/config
Pardon the interruption, we will now continue running your command.

Success. Started nginx service on your system.

This is the recommended way of setting options, because it will automatically format them correctly for later use. To set an option with jinx, you need only write jinx config <option> <value> and jinx will handle the rest

$ jinx config nginx_path /etc/nginx/
Success. Updated setting 'nginx_path' to '/etc/nginx/'.

You can do this if you want to see exactly how everything is set up. Open up ~/.jinx/config in your favorite editor and off you go. The configuration file is arranged as a set of key-value pairs separated by an equals sign.

There are a few options you can set. You can find detailed descriptions down below.

If you only provide an option key to jinx it will spit out the value that this option is currently set to.

$ jinx config nginx_path
/etc/nginx/

This can be useful if you want to do a quick check or if you want to use the value in your own script.

• nginx_path: The root directory of your nginx installation.
  This is where your nginx.conf and sites-available/sites-enabled directories should reside.

• config_path: This is where jinx looks for configuration templates. It is a subdirectory of nginx_path. By default this directory is set to templates which means jinx will look for templates in /etc/nginx/templates.

• editor: This is the editor used to open your configuration files when you use jinx site edit. You can use any editor you like (e.g. emacs or vim). I defaulted to nano, because it is the easiest for newcomers.

• grumpy: This option can be used to determine whether you want colored output or not. If you set grumpy to 1 the console output will not be colored. By default it is set to 0.

To see all commands offered by jinx, you can run jinx help and it will give you a nicely formatted list:

$ jinx help

Available commands:

config <key>                             get config value from ~/.jinx/config
config <key> <value>                     set config value in ~/.jinx/config

site activate <name> [--restart|-r]      activate a site
site deactivate <name> [--restart|-r]    deactivate a site
site delete <name> [--yes|-y]            delete a site
site create <name> [<template>]          create a site from template
site edit <name>                         edit a site .conf file with editor

start                                    start nginx service
restart                                  restart nginx service
stop                                     stop nginx service
logs                                     get nginx error logs

version                                  output jinx version number
update                                   update to latest version
uninstall                                uninstall jinx (aw!)

Does as it says. These commands start, restart or stop your nginx server.

Opens up what it determines to be the nginx error logs you have configured. For this it examines the error_log directive in your nginx.conf

This links the site you pass in from sites-available to sites-enabled, thus making it available on the web. The name of the site corresponds to the name of the configuration file. So if you have a configuration file called /etc/nginx/sites-available/pretzelhands.com.conf then the site name will be pretzelhands.com and you can activate it like so:

$ jinx site activate pretzelhands.com
Success. Activated site 'pretzelhands.com'.

You can also add the -r or --restart flag to automatically restart nginx after the activation

$ jinx site activate pretzelhands.com --restart
Success. Activated site 'pretzelhands.com'.
Success. Restarted nginx service on your system.

This deactivates any active site you have. The naming conventions work the same as for jinx site activate. And you can also pass in the same -r or --restart flag.

$ jinx site deactivate pretzelhands.com
Success. Deactivated site 'pretzelhands.com'.

$ jinx site deactivate pretzelhands.com --restart
Success. Deactivated site 'pretzelhands.com'.
Success. Restarted nginx service on your system.

This deletes any inactive site you have. Before deleting you will however be prompted if you really wish to delete your site. You may also not delete any currently active site, to prevent unexpected breaking of your websites.

When prompted if you wish to delete your site accepted values are y and yes. Note that any site you delete will be remove permanently. Be cautious and double check!

$ jinx site delete pretzelhands.com
Careful: Are you sure you want to delete site 'pretzelhands.com'? (y/N): y
Success. Site 'pretzelhands.com' was deleted.

You can also skip the confirmation by passing either -y or --yes to the command. Use this with caution!

$ jinx site delete pretzelhands.com --yes
Success. Site 'pretzelhands.com' was deleted.

This will create a new site based on a template of your choice and move it to your sites-available directory so you can immediately activate it. To find out how the template system works, please refer to the section Templating further below.

Note that the same name cannot be used twice and jinx will throw an error if you try to do so.

$ jinx site create my-awesome-website.com
Success. Site 'my-awesome-website.com' was created and can now be activated.

$ jinx site create my-awesome-php-website.com php
Success. Site 'my-awesome-php-website.com' was created and can now be activated.

This will open up the chosen site configuration in the text editor of your choice. By default nano is used, but as described in "Available Options" you can set this to any text editor of your liking.

This first version of jinx offers some very limited templating functionality to make creating sites as frictionless as possible. By default jinx will look for templates in the templates subdirectory of your nginx folder (e.g. /etc/nginx/templates.) This can be changed by adjusting the config_path setting of jinx.

The name of the template is decided by the file name of it. (e.g. a file /etc/nginx/templates/php.conf can be used by invoking the following command

$ jinx site create mysite.com php

If no special template is passed to jinx (jinx site create mysite.com), it will look for a default template in /etc/nginx/templates/default.conf, or in whichever folder you have specified for configuration templates.

All configuration templates are essentially normal nginx configuration files, with the exception that you can use ___ (that's three underscores) as a replacement variable. This will be replaced by the site name you pass to jinx site create

Here is an example of my default.conf

server {
    listen 80;
    listen [::]:80;
    listen 443 ssl http2;

    include snippets/use-https.conf;
    include snippets/use-non-www.conf;
    include snippets/use-ssl.conf;
    include snippets/use-react.conf;

    server_name ___ www.___;

    root /var/www/live/___;
    index index.html index.htm;
}

When I run jinx site create mysite.com the resulting mysite.com.conf will look as such

server {
    listen 80;
    listen [::]:80;
    listen 443 ssl http2;

    include snippets/use-https.conf;
    include snippets/use-non-www.conf;
    include snippets/use-ssl.conf;
    include snippets/use-react.conf;

    server_name mysite.com www.mysite.com;

    root /var/www/live/mysite.com;
    index index.html index.htm;
}

This is for common questions and other quips I want to add but that didn't fit in anywhere.

I personally use it to run all the ~25 virtual hosts for my freelance business and it has been doing its job well so far. I would still recommend you try it out in a local environment first, though. See how you like it and if you think it's good, put it on your server.

I'm so glad you asked! And you are indeed correct that the proper pronounciation of "nginx" is "engine-x". However before many, many people told me so, I used to consistently pronounce it as "En-jinx". So I just threw out the "En" and kept the rest. Hence, jinx!

If you like this project and want to help me out, you can go and buy me a coffee! In case that is not an option you can also help me by sharing this project with your friends and following me on Twitter

• Richard 'pretzelhands' Blechinger (Creator/maintainer)
• Vladislav 'click0' Prodan